Prestige R2 Shaker Bundle

Miro 13 Automatic DTF Powder Shaker and Dryer

Current Lead Time: 4-5 Weeks*

*Lead times are subject to change. 

Benefits: 

• The Miro 13 Automatic DTF powder applicator and dryer might be the best compact solution for an automatic shaker that is 13" wide. Its key features and benefits make it a great investment for those have limited space and only 120-volt power.
• One standout feature is the Miro 13's optimized heating system, resulting in a significant drop in power consumption and cost efficiency. The lower heating system ensures more even heating and curing, contributing to the overall quality of the output.
• The built-in air and smoke purifier is a game-changer by eliminating the need for an external air purifier while also promotes a safer and more eco-friendly environment. By building the purifier into the system, the Miro 13 system takes up less space than systems with an external purifier.
• With an easy-to-use control panel, setting and adjusting the Miro 13 is easy. Setting up the Miro 13 is a breeze – just turn on the power, and you're ready to go. This user-friendly approach ensures efficiency and minimizes the learning curve for users.
• Additionally, the Miro 13 comes with full tech support, including instructional tech videos, phone support and direct support messaging through platforms like Slack with Lawson technicians based here in the USA. 

Specifications: 

Seismo M16 DTF Powder Applicator and Dryer

The Seismo M16 was engineered for DTF printing entrepreneurs who operate their businesses with limited workspace and are looking for an affordable and manual powdering machine. It provides an affordable option for those who are just starting out with DTF and looking to shake powder and cure films in one machine.

Features:

• Compact design: The Seismo DTF powder shaker is designed to be compact, making it an excellent choice for entrepreneurs with limited space for DTF printing.
• Large Media Width: The Seismo M16 has a large media width of 16 inches, allowing for the printing of larger designs without any issues. This feature provides greater design flexibility and allows printing on a wider range of materials.
• Film curing: The Seismo M16 can also be used for film curing, ensuring that the final product is durable and long-lasting.
• Easy-to-use control panel: The control panel is user-friendly, making it easy to operate the machine with just a few clicks.

Benefits:

• Affordable: Seismo M16 is a cost-effective option for business owners who are just starting out and have a tight budget.
• Efficient and even powder shaking: The Seismo M16's shaking mechanism is efficient, ensuring that powder is evenly distributed over your DTF film.
• Durable build: The machine is built to last, with sturdy construction that can withstand the demands of daily use.
• Low noise operation: The Seismo powder shaker operates quietly, making it a great choice for businesses operating in shared spaces.

Specifications:

Purifier L2 Portable Air Filter

This Portable Air Filter is meant for mid to high-end direct-to-film printing productions. It filters gases and dust and is capable of achieving a 99.97% purification rate.

Highly recommended when curing DTF powder!

Benefits:

Transform your workspace into a haven of cleanliness and safety with our compact and lightweight solution. Engineered for tranquility, its whisper-quiet operation (less than 50 dB) ensures uninterrupted focus. Embrace productivity without compromise – because a serene environment is the foundation of boundless creativity.

Features:

• Adjustable hose
• Easy to use and operate
• 47.25-inch long hose

Specifications:

DigiRIP RIP Software

The DigiRIP RIP Software is the ultimate choice for direct-to-film printmakers. With a powerful suite of features, it stands out amongst its peers for its convenience and maximum efficiency. Enjoy a single Direct to Film software package and discover the power of DigiRIP RIP Software today.

• DigiRIP - for printers 16" or smaller
• DigiRIP Pro - for printers 17" or wider

Software Trial Version (15 Day) - Compatible with Windows only

Warm Peel DTF Film Rolls

Check out this guide on making your own costumes using this DTF film!

Features:

1. High Ink Loading Layer: You can lay down more color/white to create rich-colored decorated DTF prints.
2. Warm Peel: Peel off the film without a long wait after the first press.
3. Single Side Matte: Easily distinguish the print side.

Compatible with:

• Any DTF printer on the market - **Recommended use with a roll printer** 
• Looking for DTF film sheets instead? Go here. 

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance a softer hand feel.

NOTE: Film A3 and A3+ Sheets and A3+ (13") Rolls have returned to their normal pricing, after a temporary price decrease.

Color Max DTF Ink

Features:

• Engineered for DTF printing
• Even and consistent texture without any loss in color vibrancy
• High color density and wide color gamut
• Pairs well with DTF Powder and DTF Film

Benefits:

• Consistent and professional print quality
• Tailor-made for reliable DTF printing results

Specifications: 

• Size available - 1kg
• Colors available - CMYKW
• Shelf Life (from Manufacture Date)
• • CMYK - 1 Year
  • White - 6 Months
• Color Max DTF Ink MSDS_Cyan
• Color Max DTF Ink MSDS_Magenta
• Color Max DTF Ink MSDS_Yellow
• Color Max DTF Ink MSDS_Black
• Color Max DTF Ink MSDS_White

Hot Melt Powder for Direct-To-Film

Hot Melt Powder Material Safety Data Sheet

Formulated for use during DTG Transfer (DTF), adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTG Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more! 

Features:

• After baking the powder, solid white for more vibrant colors
• Even regular particles for quality graphics and good adherence
• The finely coated film means no pinholes!

Sizes:

• 1 lb
• 1 kg
• 20 kg

Instructions (for use with Warm Peel film):

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

*This product has no affiliation with Epson and is not endorsed by Epson.

*Settings and directions to print DTF with your F2000/2100 using Garment Creator*

• The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
• Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
• Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the CMYK/white color process and mirroring your image.
• If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
• For all other colors including white, use (Dark Colors).
• After selecting the proper color choice, you need to tinker with your color and white levels. For me personally, I use level 2 for color and level 1 for white. I leave the ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
• Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
• After your color pass is done you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT! So you MUST manually press cancel on your printer before it does so.

Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do.

WARNING

• Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

• Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

NOTE

• DTF (Direct To Film) products work with almost all types of fabrics including 100% polyester with good quality results!
• Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
• The designed fabrics or printed shirts have a good wash characteristic.
• The fabric has a very slight hand-feel touch.
• The process is much faster than Vinyl printing (Vinyl Printer).

Prestige DTF Printer Cleaning Solution

NOTE: Color may vary

Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.

Isopropyl Alcohol 16oz

99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.

Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.

*Please contact us if you are not sure whether this product would be a good solution.

Use this product with our lint-free wipe.

Do not use this product on printheads, capping stations, wiper blades, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.

Wash your face, hands, and any exposed skin thoroughly after handling the product.

Do not insert this into the tube/ lines.

When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.

Lint Free Wipes 4" x 4" - 30 Sheets

Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strips.

They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip, and capping station.

Great for printhead overnight soaking/locking.

7" Cleaning Swabs - 50 Each

Cleaning Swabs to use alongside printers.

These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of printers. Available in packs of 50 swabs each.

Features

• Foam Head
• Pairs well with all printers

Benefits

• Narrow form allows for detailed cleaning of small parts/areas

Specifications

• Swab Material: Foam
• Swab Length: 7 inches
• Quantity: 50 swabs in each pack

Prestige R2 Shaker Bundle