3801LF Plastisol Foil Adhesive | Lawson Screen & Digital Products

    Plastisol Foil Adhesive 3801LF

    International Coatings

    • $42.59


    Add Metallic Foil To Your Designs With Plastisol Foil Adhesive 3801LF

    International Coatings 3801LF is a clear Plastisol Foil Adhesive that can be used on 100% cotton garments and some cotton/polyester blend fabric to produce brilliant metallic foil designs on textiles. Plastisol Foil Adhesive is ready to print right out to the container and can be printed on light or dark t-shirts. Stir prior to use. Dry cleaning is not recommended.

    Foil is applied colored side up and aluminum looking (dull) side down. Rub foil with eraser immediately after application to help remove any wrinkles. Allow transfer to cool completely (20 to 30 seconds) after application before removal of foil sheet. Pull foil sheet off slowly.
    It can be helpful to tint the 3801LF Foil Adhesive, to the color of the foil being applied, with a small amount of conventional plastisol. This process will help to keep small pinholes in the applied foil film from being noticeable. As example: Use a few grams of yellow or gold plastisol in the 3801LF Adhesive when using gold foil. Use a few grams of black or gray plastisol in the 3801LF Adhesive when using silver foil.

    300F to 325F (149C to 163C). Try lower temperature first for best results.

    10-15 Seconds

    T-Shirts = Medium (40lbs.)
    Sweatshirts = Medium to Heavy (40lbs. to 60lbs)
    The brightest foil effect will result when the foil is first removed. To achieve a textured matte finish foil, re-seal the garment or hat in the transfer press for 3-4 seconds after the foil carrier film has been removed.

    For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.

    Additional Information
    Click here for product MSD Sheet