Khaki DI - 31330 LB


    • $45.10


    Khaki DI - 31330 LB | Low-Bleed and Low-Cure

    Dynamic Ink Khaki DI-31330 LB is one of the premier plastisol screen printing inks. It offers the best opacity and bleed resistance on polyester, 50/50s and blends. This DI ink is a low cure ink, curing at 270 - 280 degrees, to help eliminate dye-migration on even the worse "bleeders".

    All Dynamic Ink flashes quick so you can speed up production when printing a white under base. You can also print-flash-print, or print wet-on-wet, depending on your screen print job.

    All of the inks in the Dynamic Series are non-phthalate and lead-free. The Dynamic series offers some of the most vibrant colors and an easy to print creaminess plastisol ink right from the bucket. The high opacity helps all screen printers achieve a better print with a great feel/hand.

    Curing Instructions:
    Flash at approximately 220 degrees for about 3 - 5 seconds and cure at 270 - 280.

    Clean Up and On-Press Color Changes:
    Use a press wash for on-press colors changes and an ink degradent when removing the ink. The stencil can then be saved or you can reclaim the entire screen printing frame.

    Storage Information:
    Store are room temperature and avoid direct sunlight. Best to use within one year of manufacturing date.

    Features & Tips for Optimal Results

    Pantone 468C

    Finish: Semi-Gloss
    Stencils: All Types of direct emulsion or capillary film
    can be used
    Opacity: Opaque
    Wash-Up: Use Thinner DT or any conventional plastisol
    wash-up system
    Bleed Resistance: Excellent - Great for all polyester
    Storage: Store in a relatively cool area. Keep away from
    extreme heat and direct sun penetration. Store below 95℉

    Ink Build-Up on Screen: Minimal
    Mileage: Excellent. Approximately 800-1,750 sq. ft. per gallon
    Drying: 270℉  - 280℉ 
    Fabrics: All types. For soft-hand coverage, use 196 to 305 monofilament

    Always pretest before use to establish suitability and procedures prior to production.

    Stir plastisols prior to each use. Do not dry clean or use bleach, or direct iron.