Cost-effective solution for every screen printer, large or small, low or high-volume.

Discontinued Series - See Mini-Printer M-Series for a small-format alternative

Lawson's Mustang press is loaded with features that printers can use to increase production and profits.

The Lawson Mustang is a clam-shell press that combines sophistication, control, consistency and reliability in one space-saving package. It's easy to set up, operate and maintain, and prints on paper, vinyl, Mylar, foils, plastics, metal, glass, wood, transfers...just about anything flat with pinpoint (+/-.001-inch) accuracy.

All Lawson Mustang printing presses are shipped fully assembled, ready to print, and no special training is required. All adjustments are fast and easy, without tools.

Standard Features
- Up-Front Peel
- Solid Aluminum, Honeycomb Vacuum Table
- Direct Dial Squeegee/Flood Bar Pressure Controls
- Side Screen Loading
- Dual-Crank Arms
- Low-Profile, Wide Rail Design
- Quick-Adjust Angle Controls
- On-Contact Ability
- Masterframe/Universal Screen Holder
- Micro-Registration with X,Y,Z Movement
- Adjustable Height Table
- Etched Micro-Registration Locator Grid
- Variable Flood, Print and Lift Speeds...All DC Motor Controlled
- Single Cycle, Jog and Dwell Mode Settings
- Foot Pedal
- Electric Print Counter
- Sliding Frame Clamps
- Plated Carriage Assembly
- Adjustable Print Stroke
- Channel-Balanced Vacuum with Adjustable Timing
- Slanted Control Box
- Etched Control Panel
- Off-Contact Control
- No Tool Adjustments
- Swivel/Anti-Rock Leveling Pads
- Wrap Safety Bar
- Safety Reset System
- Stationary Motor and Reducer (excludes Mustang 14)
- 120 Volts; 1-Phase, Standard Plug-In Wiring
- 1 Year Parts Warranty
* Recommended Frames Size is 1" less in the print stroke direction.
* Required if Optional Load-Leveler is Purchased
** Amperage must be recalculated if incoming voltage is different.
Optional Features
- Aluminum Squeegee Holder (with or without blade)
- Aluminum Flood Bars
- Load-Leveller (air required)
- Air Frame Locks (air required)
- Disappearing Guides (air required)
- Floor Casters
- Companion Take-Off (left side standard)
- Metal or Adjustable Screen Frames
- Export Electrics
- Dial Indicators for Precise Micro-Registration

	1422	2230	2538
Maximum Print Area	14” x 22”	22” x 30”	25” x 38”
Minimum Print Stroke	6”	16”	16”
Vacuum Bed OD	22” x 31”	34” x 41”	35” x 48”
Overall Floor Area	51” x 36”	74” x 48”	74” x 56”
Maximum Frame Size*	31” x 34”	43” x 45”	43” x 54”
Minimum Frame Size (OD Stroke)	22”	29”	29”
Electrical Information**	120 Volts 1-Phase 15 Amps	120 Volts 1-Phase 18 Amps	120 Volts 1-Phase 18 Amps
Air Information*	N/A

*Free Ground Shipping on Parts; No Charge Labor for Items Sent Back to St. Louis for Repair or Replacement
*Price, Design, and Technical Specifications Subject to Change Without Notice

Mustang Flatbed Screen Printing Press at SGIA 2018

Lawson Mustang 14 Flat-Bed Graphic Press

Mustang Flatbed Print Press with V-Tech Dryer

Item added to your cart

Mustang Flatbed Screen Printing Press

Mustang Flatbed Screen Printing Press

Lawson Screen & Digital Products

SKU:

Item Discontinued

We recommend this alternative product:

Payment & Security

Shipping, Crating, and Packaging Fees

Download Product's PDF Brochure

Financing Options

Got a question about this product?

FlatBed Graphic Screen Printing Presses - All Made in the USA!

Cost-effective solution for every screen printer, large or small, low or high-volume.