Lawson Screen & Digital. Screen Printing Supplies and Equipment

Multi-Choice Super Opaque Colors

Multi-Choice Opaque is a plastisol ink designed specifically for high opacity and bleed-resistant applications. Ideal for printing 50/50 blends and other difficult fabrics. In fact, if you want just one ink to do everything, Multi-Choice Opaque is the choice. For example, with the addition of MSB-100 Clear/Soft-Hand Extender, Multi-Choice Opaque can achieve a “soft-hand” feel without affecting the cure time! You also can add our Puff Concentrate and have a true “puff ink” with the added advantage of being able to control the amount of puff desired. We even have an Athletic Additive that increases adhesion without a two-part catalyst) and abrasion-resistance. For nylon jacket printing, the addition of a jacket catalyst will turn Multi-Choice Opaque into a two-part ink that really sticks.

Buy Multi-Tech Plastisol Ink Below:
	MCO-400 Brt. Orange Pantone 172C	MCO-802 Brt Green Pantone 355C
	MCO-505 Cherry Red Pantone 1795C	MCO-900 Gold Pantone 1235C
	MCO-5140 Rojo Red Pantone 187C	MCO-902 Light Gold Pantone 116U
	MCO-703 Light Blue Pantone 306U	MCO-903 Lemon Yellow Pantone 107C

Features and Tips
Finish: Semi-gloss.
Opacity: Excellent.
Mileage: Excellent. Approximately 450 to 1650 sq. ft. per gallon, depending on ink deposit and screen mesh.
Drying: 300° F - 330° F for 2-3 minutes for direct printing; 220° F - 240° F for 30-60 seconds for transfers.
Fabrics: All types. For maximum coverage on dark garments, use 61 to 110 monofilament.
Stencils: All types of direct and capillary film systems. For hand-cut stencils, use water-soluble films.
Wash-up: Use Thinner DT or any conventional plastisol wash-up system.
Reducers/Thickeners: Reducer/Thinner DT will reduce tackiness and viscosity. It also will reduce “ink hang” in the screen while maintaining opacity. Use 1% - 3% by weight. Reducer/Thinner PL will increase gloss and film elongation. It also will improve “ink flow.” However, it cuts opacity and slightly increases the dry/cure time. Use 1% - 5% by weight. Use with caution. Thickener Paste will stir in easily and will slightly increase the viscosity of the ink. It also will slightly increase dry/cure time. Use 1% - 5% by weight. Thickener Powder also will increase the viscosity but will not affect the dry/cure time. However, it must be stirred in with a drill mixer. Use up to 1% by weight.
Storage: Store in a relatively cool area. Keep away from extreme heat and direct sun penetration. Store below 95°F.

Stir plastisols prior to each use. Do not dry clean or use bleach.
Always pretest before use to establish suitability and procedures prior to production.