A degreaser solution for all mesh, new or used, before stencil making.
Ready-to-use. No mixing. Non-caustic.

Ulano No. 3 Screen Degreaser Liquid


A degreaser solution that removes dirt, dust and oils from all fabrics, new and used.

Degreasing should be considered a first step in stencil-making, as it greatly reduces the risk of stencil-making failure, extends on-press stencil longevity, and alleviates pinholing. Screen Degreaser Liquid No. 3 is ready-to-use--no mixing. Degreases effectively in hard water. Rinses clean with hot or cold water. Non-caustic--will not harm frames, fabric, or adhesives on stretch and glue frames. Reccomended for use with all Ulano stencil systems.
Instructions

  • If using Screen Degreaser Concentrate No. 33, mix ten parts water to one part Ulano No. 33.
  • Apply Screen Degreaser Liquid No. 3 or Screen Degreaser Concentrate No. 33 to a wet screen from both sides with a wet, soft, long-bristle nylon brush. Continue brushing until a light foam develops.
  • Let the screen stand a few minutes until the foam subsides.
  • Rinse the screen thoroughly from both sides. Including the inside edge of the frame and the frame corners, with hot or cold water.

    • Price: $11.50
    Buy Product Online | Visit Store Home
     
    Manufactured by Ulano

      Related Products


      Flat Brush 3.5" x 6" - 
      Neoprene Rubber Gloves - Gloves should always be used when working with chemicals & solvents.
      Chemical Goggle with Splash Frame - Great for cleaning screens!


     Other Items from Pre-Press Items

      32 oz Chemical Resistant Spray Bottles without Spray Head - 
      Chemical Resistant Spray Head ONLY - For 32 oz. Bottle
      High Pressure Washer #GC-1250 - Pressure washer to clean screens and more...
      Lawson Red Coat Blockout - 
      Ulano #60 Blockout - Screen filler - a non-flammable, water soluble blockout for use with fine to medium mesh counts
      Ulano #10 Extra Heavy Blockout - A heavy, non-flammable, water-soluble blockout for use with coarse mesh counts
      Ulano No. 2 Microgrit - A powder for mechanical treatment/abrasion of polyester mesh.
      Ulano No. 3 Screen Degreaser Liquid - A degreaser solution for all mesh, new or used, before stencil making.
    Ready-to-use. No mixing. Non-caustic.
      Ulano No. 23 Gel Degreaser & Microgrit Combo - An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3
      MD-100 Mesh Degreaser - For degreasing new and used screen mesh. Drain safe.
      Ulano CDF-25 Mesh Prep - Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.

     
      Return To Lawson Screen & Digital Products, Inc.

     

     
    e-commerce software
    E-commerce powered by MonsterCommerce shopping cart software.