An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3

Ulano No. 23 Gel Degreaser & Microgrit Combo


Combine Ulano No.2 Microgrit and Ulano No.3 Degreaser and you get No.23 abrasive degreaser gel that mechanically abrades and degreases mesh in one operation. You need this for capillary film.

The abrading action of Ulanogel 23 promotes better wetting of the fabric and adhesion of the stencil, and thus, longer press life. Its degreasing action removes dirt, dust, and oils from the fabric, reducing the risk of stencil failure and pinholing. Ulanogel 23 is ready-to-use and rinses off in hot or cold water. Its thixotropic character permits easy and effective preparation of larger screens held in a vertical position. Non-caustic - will not harm frames, fabric, or adhesives on stretch and glue frames. Recommended for use with all stencil systems on synthetic fabric only.
Instructions

  • Dampen the screen with water.
  • Apply Ulanogel 23 to both sides of the screen and scrub vigorously with a wet, stiff, short-bristle nylon brush on both sides of the fabric.
  • Rinse the screen throroughly from both sides, including the inside edge of the frame and the frame corners, with hot or cold water.

    • Price: $17.88
    Buy Product Online | Visit Store Home
     
    Manufactured by Ulano

      Related Products


      Neoprene Rubber Gloves - Gloves should always be used when working with chemicals & solvents.
      Chemical Goggle with Splash Frame - Great for cleaning screens!
      Flat Brush 3.5" x 6" - 


     Other Items from Pre-Press Items

      32 oz Chemical Resistant Spray Bottles without Spray Head - 
      Chemical Resistant Spray Head ONLY - For 32 oz. Bottle
      High Pressure Washer #GC-1250 - Pressure washer to clean screens and more...
      Lawson Red Coat Blockout - 
      Ulano #60 Blockout - Screen filler - a non-flammable, water soluble blockout for use with fine to medium mesh counts
      Ulano #10 Extra Heavy Blockout - A heavy, non-flammable, water-soluble blockout for use with coarse mesh counts
      Ulano No. 2 Microgrit - A powder for mechanical treatment/abrasion of polyester mesh.
      Ulano No. 3 Screen Degreaser Liquid - A degreaser solution for all mesh, new or used, before stencil making.
    Ready-to-use. No mixing. Non-caustic.
      Ulano No. 23 Gel Degreaser & Microgrit Combo - An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3
      MD-100 Mesh Degreaser - For degreasing new and used screen mesh. Drain safe.
      Ulano CDF-25 Mesh Prep - Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.

     
      Return To Lawson Screen & Digital Products, Inc.

     

     
    e-commerce software
    E-commerce powered by MonsterCommerce shopping cart software.