Ulano CDF-25 Mesh Prep

Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.

Ulano CDF-25 Mesh Prep

A ready-to-use liquid mordant that promotes fabric water retention and, thus, the uniform adhesion of all Direct Films. All Mesh Prep is especially helpful for use with thin CDF® Direct Films applied to fine fabric, which inherently holds little water. All Mesh Prep No. 25 rinses easily from the screen with hot or cold water. Non-caustic - will not harm frames, fabric, or adhesives on stretch and glue frames. Recommended for use with all CDF® Direct Films. Do not use on natural silk.

Instructions

Apply All Mesh Prep No. 25 only after the fabric has been thoroughly degreased and immediately before adhering the Direct Film.

Rinse both sides of the screen thoroughly with water.

Apply All Mesh Prep No. 25 with a medium-stiff, long bristle nylon brush to both sides of the screen.

Let the screen stand for one or two minutes.

Rinse the screen thoroughly from both sides with hot or cold water.

All Mesh Prep No. 25 should be used no more than one hour before adhering the film. If you do not proceed immediately to adhere the Direct Film, re-wet the screen just before adhering the film.

Price: $17.88
Buy Product Online | Visit Store Home

Manufactured by Ulano

  Related Products

  Neoprene Rubber Gloves - Gloves should always be used when working with chemicals & solvents.
  Flat Brush 3.5" x 6" -
  UV Protection Safety Eyewear -

Other Items from Pre-Press Items

  High Pressure Washer #GC-1250 - Pressure washer to clean screens and more...
  32 oz Chemical Resistant Spray Bottles without Spray Head -
  Chemical Resistant Spray Head ONLY - For 32 oz. Bottle
  Ulano No. 2 Microgrit - A powder for mechanical treatment/abrasion of polyester mesh.
  Ulano No. 3 Screen Degreaser Liquid - A degreaser solution for all mesh, new or used, before stencil making.
Ready-to-use. No mixing. Non-caustic.
  Ulano No. 23 Gel Degreaser & Microgrit Combo - An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3
  MD-100 Mesh Degreaser - For degreasing new and used screen mesh. Drain safe.
  Ulano CDF-25 Mesh Prep - Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.
  Flat Brush 3.5" x 6" -
  RhinoMite Two-Part Frame & Mesh Adhesive - UPS Ground ONLY

  Green Blockout Pen - Ultra-Fast Drying

Return To Lawson Screen & Digital Products, Inc.