Ulano #10 Extra Heavy Blockout

A heavy, non-flammable, water-soluble blockout for use with coarse mesh counts

Ulano #10 Extra Heavy Blockout

A heavy, non-flammable, water-soluble blockout with effective coverage in a single coating especially with coarse mesh. Can be used for touchups when thinned with cold water. Can be used in unventilated rooms since it contains no organic solents. Recommended for use on all mesh, with all stencil systems. Use only with non-aqueous inks. Blue color.

Instructions

For direct emulsion and CDF Direct-Film stencils: Pour a small amount of Extra Heavy Blockout No. 10 onto the open border area of the fully processed and dried stencil on the printing side of the screen. Scrape it evenly into the fabric, using a piece of cardboard or plastic. Use the scraper to smooth and thin the layer to promote quick drying.

For Indirect System stencils: For best register and a strong "knit" between stencil and blockout, apply the Extra Heavy Blockout No. 10, as above, when the screen fabric is dry, but before the film is completely dry. Apply the blockout to the printing side of the screen, going over the edges of the backing sheet. Let the stencil and Extra Heavy Blockout No. 10 dry completely before printing.

For touchups: Thin Extra Heavy Blockout No. 10 with cold water and touch up as needed.

To remove: After ink removal, but before stencil removal, rinse with water.

Price: $15.33
Buy Product Online | Visit Store Home

Manufactured by Ulano

  Related Products

  Lawson Red Coat Blockout -
  Ulano #60 Blockout - Screen filler - a non-flammable, water soluble blockout for use with fine to medium mesh counts
  Squeegee Cards -

Other Items from Pre-Press Items

  32 oz Chemical Resistant Spray Bottles without Spray Head -
  Chemical Resistant Spray Head ONLY - For 32 oz. Bottle
  High Pressure Washer #GC-1250 - Pressure washer to clean screens and more...
  Lawson Red Coat Blockout -
  Ulano #60 Blockout - Screen filler - a non-flammable, water soluble blockout for use with fine to medium mesh counts
  Ulano #10 Extra Heavy Blockout - A heavy, non-flammable, water-soluble blockout for use with coarse mesh counts
  Ulano No. 2 Microgrit - A powder for mechanical treatment/abrasion of polyester mesh.
  Ulano No. 3 Screen Degreaser Liquid - A degreaser solution for all mesh, new or used, before stencil making.
Ready-to-use. No mixing. Non-caustic.
  Ulano No. 23 Gel Degreaser & Microgrit Combo - An abrasive degreaser gel that combines the actions of Microgrit No. 2 and Screen Degreaser Liquid No. 3
  MD-100 Mesh Degreaser - For degreasing new and used screen mesh. Drain safe.
  Ulano CDF-25 Mesh Prep - Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.

Return To Lawson Screen & Digital Products, Inc.