Using Laser 1 Opaque Papers

You will need the following
1) A Color Laser Copier
2) A Pre-Washed and dried Dark Colored T-Shirt
3) A Heat Press

The Print Side of the paper is the blank side (this is the coated side of the sheet). Image the Laser 1 Opaque in your Color Laser Copier by using the most "straight line" feed possible, (usually the by-pass tray) and using a "heavy paper" setting. Some machines may require the "Extra Heavy Weight paper" setting.
DO NOT FLIP OR MIRROR THE IMAGE!

Caution should be taken in handling the image prior to transfer!

• Before trimming make a small tear in an area to be trimmed away, and separate the paper backing slightly into the imaged area. (This aids greatly in separating the image after trimming)
• Trim away any imprinted area that you do not want to transfer.
• Pre-Press your T-Shirt for 3-5 seconds to remove any moisture and wrinkles and allow the shirt to cool.
• Peel away the paper backing and position your image with the image side up on the shirt and cover with the pressing sheet.
• Press for 20 Seconds at 325°F using Medium Pressure
• Remove from the Heat Press and allow to Cool Completely before attempting to remove the Pressing Sheet.